* Easy installation

* Includes 2 mono-tube, dual chambered damper cartridges

* Nitrogen chambers with internal floating pistons

* Performance spring rate

* Machined 303 Stainless threaded pre-load adjuster

* Increased pre-load range allows fine tuning for various riding styles and weights

* Ride quality is smooth and controlled

* Improves stability, cornering and traction

* Eliminates front-end dive during aggressive braking and maneuvering

* Firm feel for high-speed sweeping turns

* Eliminates bottoming out on large bumps or potholes

* Reduces dragging floorboards and pegs

* Designed for optimum performance with Legend rear suspensions

Tech Tips:-

* Some Dyna Models may require purchase of one (1)HD OEM # 45500118 restrictor bolt to complete the installation.

* Fitment of this kit requires Two (2) Alignmnet caps – One (1) only alignment cap is supplied with the kit , The other must be re-used from the original forks !

Proudly Made by hand in Sturgis, SD USA

* All new Legend AIR Suspensions Systems sets the high mark in ultimate ride quality.

* New redesigned exclusive Aramid Fiber air spring technology provides spring rate adjustability.

* Air springs maximize wheel travel & adjust to any desired ride height.

* Hard anodized machined aluminum bodies.

* Legend’s low-friction seals eliminate stiction.

* High flow piston reacts quickly for improved fluid flow management.

* Deflective discvalved damping self adjust to frequency & ensures controlled performance.

* Air compressor included, pre-wired & model specific mounting.

* Complete wire harness installed with three easy Deutsch connections.

* System includes OEM looking black handlebar mounted control for easy in.on-the-goin. adjustability.

* Optional chrome handlebar mounted control # LEG-0616-0207, sold separately.

Made by hand in Sturgis, South Dakota, USA !

Fits Legend Suspension AERO-ST 1311-0145 kits for Softails (2000-2017)

* All new Legend AIR Suspensions Systems sets the high mark in ultimate ride quality.

* New redesigned exclusive Aramid Fiber air spring technology provides spring rate adjustability.

* Air springs maximize wheel travel & adjust to any desired ride height.

* Hard anodized machined aluminum bodies.

* Legend’s low-friction seals eliminate stiction.

* High flow piston reacts quickly for improved fluid flow management.

* Deflective discvalved damping self adjust to frequency and ensures controlled performance.

* Air compressor included, pre-wired & model specific mounting.

* Complete wire harness installed with three easy Deutsch connections.

* System includes OEM looking black handlebar mounted control for easy in.on-the-goin. adjustability.

* Optional chrome handlebar mounted control # LEG-0616-0207 sold separately.

Tech Tips:-

* Requires removal of one shock to attain accessibility to the transmission oil drain plug.

* Airbag to transmission case clearance must be checked at rear lower

trapdoor mount boss.

Made by hand in Sturgis, South Dakota, USA !

* REVO coils improve ride quality, control, & resistance to bottoming-out

* Minimal preload adjustments when changing riders, weights or loads

* Billet Aluminium 45mm smooth bore twin tube design with 25mm piston reacts quickly for improved fluid flow

* Sandvik Deflective Disc valved damping self-adjusts to frequency & ensures controlled performance

* Low friction sealing system and PTFE based sliding bearings improve performance & feel

*External knobs provide 3 adjustments for fine-tuning of rebound

* Stainless Steel tie bar design and construction

* Available in standard length shocks only for optimum ride quality and performance

* Black Type Hard Coat Anodized

* Easy Installation and Adjustment

* Sold in Pairs

Tech Tips:-

* Heavy Duty application are recommended for 110kg+ rider & passenger total weight. Also consider Heavy Duty if most of your riding is 2-UP, stunt riding, or aggressive riding style.

* Before fitting, check the front shock mount stud has approx. 57mm of exposed Thread. After fitting there should be approx. 8mm of thread protruding past the Nyloc lock nut.

* Shocks are supplied on the softest setting – Sag or preload must be set prior to test riding the vehicle.

* A short, thin 7/8in. open end spanner is best to perform the Sag or preload adjustment

* Apply a liberal amount of CRC or similar penetrating lubricant to the preload Nutarea before attempting any preload adjustment

* Turn the 7/8in.AF preload adjusting nut Counter Clockwise to Increase the spring preload.

* When Increasing preload – Do NOT turn the 7/8in.AF preload adjusting nut out any further than the 3rd or final preload reference line

* Take care when placing the bike on the jack not to damage the Shock or Rebound adjusting knobs

Made by hand in Sturgis, South Dakota, USA !

* OEM # 54666-08 required for 1991-2005 models.

* If you are purchasing longer or shorter suspension, confirm that changing your Suspension travel will not cause clearance issues.

* Made by hand in Sturgis, South Dakota, USA !

* Heavy Duty applications are recommended for 225kgs & up rider and passenger total weight.

* If you are purchasing longer or shorter suspension, confirm that changing your Suspension travel will not cause clearance issues.

Made by hand in Sturgis, South Dakota, USA !

* All the benefits of the new REVO shocks above plus six external knob adjustments allow fine-tuning of rebound.

* Provides optimum rebound performance for any given rider weight, personal ride quality preference or personal riding style.

* Light to heavy riders can fine-tune ride preference.

* Aggressive to casual riding styles can tune to desired quality or personal preference.

Tech Tips:-

* Heavy Duty applications are recommended for 225kgs & up rider and passenger total weight.

* OEM # 54666-08 required for 1991-2005 models.

* If you are purchasing longer or shorter suspension, confirm that changing your Suspension travel will not cause clearance issues.

Made by hand in Sturgis, South Dakota, USA !