Designed for a bolt-in application. Our clutch basket features 12

cylindrical replaceable clutch dogs, which allows our clutch steels to maintain constant contact. The polished pressure plate uses nine shoulder bolts and springs, which allows simple installation. Our Kevlar clutch plates give maximum performance. We include a sealed bearing for the inner primary for 1986 & Up belt drives.

# 8mm drive with BDL clutch

# Billet motor plate

# All mounting components

# All new quiet clutch

BDL have eliminated the Front Pulley and Engine Shaft Support and Front Bearing of the Outbourd Support.

The reason for this change was due to the many aftermarket components that come together on a special construction motorcycle, they found that a lot of these components do not allow proper alignment of the entire motorcycle.

When using an outboard support that was intended to keep the Front Engine and Rear Transmission Shafts from moving excessively, improper alignment will cause unusual wear and premature failure of the sealed bearings. By supporting only the Rear Shaft, which is all that is really needed, we have eliminated any potential problems that mis-alignment may cause.

* Works with OEM 1970-78 4 speed ratchet lid transmissions & aftermarket 5-in-4 speed transmissions.

Tech Tips:-

* Will NOT work with 1979-84 OEM 4 speed plate top transmissions.

* Will NOT work with aftermarket 4 speed transmissions.

* Requires 1990-2006 style starter motor #ABR-80-1001

* Requires BCM-7072, JGI-12014 and BDL-CDAS-200.

* Some modification may be necessary to install.

* Includes transmission mounted electric start plate with mini starter housing, pinion gear and starter ring gear guard.

Tech Tips:-

* Requires 1990-2006 style starter motor #ABR-80-1001

Designed for stock applications.

Increasing the Horsepower & Torque of the engine will severely limit the life of the belt.

* Designed for stock applications.

Increasing the Horsepower & Torque of the engine will severely limit the life of the belt.

* Replacement Belt # BDL-142-2

* 8mm drive with BDL clutch

* Billet motor plate

* All mounting components

* Also included in this drive kit is BDL’s NEW Ball Bearing Clutch system!

Tech Tips:-

* Will fit with Floorboards

* This is just a bolt in kit no modifying, The front pulley is designed to fit right into the spring part in.bellin. of the stator rotor, You must align the front pulley with a shim or shims for correct alignment , But they must remember to tighten the front pulley to torque spec to align properly because spring pack inside of in.bellin. will collapse as you tighten, No need to cut or remove anything,

* Supplied complete with a BDL Clutch

Tech Tips:-

* Primary Drive Ratio of 1.53:1 vs Stock of 1.54, gives slightly more top end.

* Fits models originally running a 3, 5 or 10 Stud Dry Clutch

* Fits 1955up Big Twin with Splined Engine Shaft

* Fits Kick Start only