* Meticulously handmade from high-quality 16GA stainless steel, mandrel bent then gas purged and TIG welded.

* Heat Shields are bolted with tie wired fasteners for a race-inspired look.

* One of the best performing Harley exhausts on the market.

* Double slip fit and gusset for additional strength.

* O2 ports included.

* Made in the U.S.A.

Suggested Additional Purchase:

* New exhaust gaskets # CG-C9928

Tech Tips:-

* 2012-2017 models require BAI-U08-6416

* The final cure of the black exhaust coating occurs on the bike, the coating gets stronger as the pipe runs its first few heat cycles

* Newly fitted pipes should be wiped down with Mr Sheen or a mild soap & water mix.

* Fuel Mixture Calibration is Advised.

* Swept-up muffler for enhanced ground clearance.

* Black Billet TURNOUT end cap.

* Mandrel bent stainless steel tubing.

* All TIG welds done by hand.

* High-temp SS wool and packing material.

* Fits with forward and mid controls.

* Available in brush stainless finish.

* Accepts stock O2 sensor, as well as aftermarket wide band (18mm) sensors

* Heat shields included (not pictured on bike).

* 17lbs of weight savings.

Tech Tips:-

* Does not fit 240 tyre models

* Model with Saddlebags (i.e. Heritage, Sport Glide, Low Rider ST) require purchase of Saddlebag relocation bracket # TBR-005-496-SGB

Proudly Made in the USA by Two Brothers Racing !

* 4in. rolled cone muffler with a 2 ¼ coiled perforated baffle for increased torque and a deep tone

* 065 stainless steel headers stepped from 1 ¾in. to 1 7/8in. to 2in. at the collector

* Hand tig welded from top to bottom

* Machined stainless steel header collars

* 18mm o2 bungs with 12mm adapters, allows for stock or wideband sensors

* Complete hardware kit with everything you need to mount it up

Tech Tips:-

*FLHC, FLSB, FXLRST or any M8 Softail model running HD accessory saddlebags, require the purchase of a Saddlebag relocation bracket SPC-050-SG-B

*For fitment to 2025up FXLRST, the saddlebag bracket must be fitted to the rear peg location. If using rear pegs fit them over the saddlebag bracket.

* Will Not Fit 240 Rear Tyre Models (FXBR,FLFB,FXDR)

Proudly Made in the USA by Stainless Powered Concepts !

* Fits stock Harley mid controls and highway pegs.

* Designed and tuned for max torque and horsepower.

* Swept-up design for enhanced ground clearance.

* Carbon fiber end cap.

* Mandrel bent stainless steel tubing.

* All TIG welds done by hand.

* High temp SS wool and packing material.

* Aggressive sound.

* MADE in the USA!

* 4.5in. high flow performance rolled cone muffler with stepped baffle from 2 ¼ to 2 ½ inches. Increases bottom to mid-range torque and horsepower on all motors. Tuned properly can accommodate 88in. to 143in..

* 065 stainless steel headers stepped from 1 ¾in. to 1 7/8in. to 2in. at the collector

* Hand tig welded from top to bottom

* Machined stainless steel header collars

* 18mm o2 bungs with 12mm adapters, allows for stock or wideband sensors

* Complete hardware kit with everything you need to mount it up

Tech Tips:-

*FLHC, FLSB, FXLRST or any M8 Softail model running HD accessory saddlebags, require the purchase of a Saddlebag relocation bracket SPC-050-SG-B

*For fitment to 2025up FXLRST, the saddlebag bracket must be fitted to the rear peg location. If using rear pegs fit them over the saddlebag bracket.

* Will Not Fit 240 Rear Tyre Models (FXBR,FLFB,FXDR)

Proudly Made in the USA by Stainless Powered Concepts !

* 4in. Round Muffler

* Unique Guardian black coating that makes the deep black finish stay that way

* Improved power & torque for greater rideability.

* The ‘Race’ version has a Deep 2:1 performance exhaust note

* Removable dB Reducer (J2825 compliant)

* Make sure you are also running the S&S air cleaner for the smoothest running & maximum performance outcome # SS170-0298C

Tech Tips:-

* Fuel Mixture Calibration is Advised.

Proudly Made in the USA by S&S Cycle !

Indian Cruiser Line; Chief Dark Horse & Chief Bobber Dark Horse

Features & Benefits:-

* 4.5in. Body.

* Triple Stepped Headers 1.75in. to 1.875in. to 2.00in. for Increases in Horse Power & Torque.

* Equipped with a 2 Step Baffle 2.5in. to 3in.

* Combined 5 Steps throughout for Extreme Power.

* Header Flows into a Mini-Cone to Create a Deep, Rich and Throaty Sound.

* Boasting Full-Coverage One-Piece (220°) Heatshields.

* Works with12mm & 18mm O2 Sensor.

Tech Tips:-

* Optional Quiet Baffle is available, Part Number FPE-AC00222

* Fuel Mixture Calibration is Advised.

Proudly Made in the USA by Freedom Performance !

* 4in. rolled cone muffler with a 2 ¼ coiled perforated baffle for increased torque and a deep tone

* 065 stainless steel headers stepped from 1 ¾in. to 1 7/8in. to 2in. at the collector

* CNC billet aluminium endcap

* Hand tig welded from top to bottom

* Machined stainless steel header collars

* 18mm o2 bungs with 12mm adapters, allows for stock or wideband sensors

* Complete hardware kit with everything you need to mount it up

Proudly Made in the USA by Stainless Powered Concepts !

* Swept-up muffler for enhanced ground clearance.

* Black Billet TURNOUT end cap.

* Mandrel bent stainless steel tubing.

* All TIG welds done by hand.

* High-temp SS wool and packing material.

* Fits with forward and mid controls.

* Available in ceramic black.

* Accepts stock O2 sensor, as well as aftermarket wide band (18mm) sensors

* Heat shields included (not pictured on bike).

* 17lbs of weightsavings.

Tech Tips:-

* Does not fit 240 tyre models

* Model with Saddlebags (i.e. Heritage, Sport Glide, Low Rider ST) require purchase of Saddlebag relocation bracket # TBR-005-496-SGB

Proudly Made in the USA by Two Brothers Racing !

* Stainless steel stepped header.

* Includes Exhaust port gaskets.

* Class-leading ground clearance.

* Works with OEM & similar size saddlebags like Heritage or Sport Glide models.

* Works with floorboard, forward controls & factory passenger pegs.

* Models still running mid mounts, FXBB Street Bob & FXLR Low Rider require brake pedal kit # SS560-0370.

* Full heat shields on both front & rear headers.

* Show quality chrome finish.

* Oxygen sensor ports allow use of wide band or stock O2 sensors.

* Includes removable dB Reducer.

* J2825 compliant.

Tech Tips:-

* Will Not Fit Breakout 2018up.

* Will Not Fit Fatboy 2018up.

* Will Not Fit FXDR 2019up.

* Fuel Mixture Calibration is Advised.

Proudly Made in the USA by S&S Cycle !