* Soaks up small road bumps, yet firm enough to absorb the big ones.

* Helps reduce front end dive during braking,

* Provide excellent ride comfort.

* Rising rate resistance to compression.

* Soft at the start of the travel to offer a in.plushin. ride, firm at the end of the travel to soak up big bumps.

Tech Tips:-

* Does NOT fit V-rod with Inverted Front-End

Fitment:

* Dyna ’06up (exc.FLD)

* Softail Rocker ’08-11

* Softail Breakout ’14-17 (not M8)

* V-Rod’02-11 i.e. with NON-Inverted Front End

Proudly Made in the USA by Progressive Suspension !

* Soaks up small road bumps, yet firm enough to absorb the big ones.

* Helps reduce front end dive during braking,

* Provide excellent ride comfort.

* Rising rate resistance to compression.

* Soft at the start of the travel to offer a in.plushin. ride, firm at the end of the travel to soak up big bumps.

Tech Tips:-

* Standard Spring Rate, Recommended for Riders Weighing Under 110kg.

* Does not fit models with OEM InvertedFront End

* Will Not Fit FLHTCUL Ultra Classic Low 2015-2016.

* Will Not Fit FLHTKL Ultra Limited Low 2015-2016.

Proudly Made in the USA by Progressive Suspension !

* Complete kit, includes all parts needed for a complete rebuild of one set of 49mm front fork leg assemblies

* Kit includes: two fork boots, two oil seal caps, two oil seal retaining rings, two fork O-ring caps, four damper tube seal rings, two fork slider washers, two lower fork tube bushings, two fork slider oil seals, two fork slider, upper bushings, two dust seals, two fork tube cap O-rings and two oil seal retaining rings.

* Replaces OEM # 49379-09A

* Fits Softail Rocker 2008-2011.

* Fits Softail Breakout 2013-2017.

* Fits Dyna 2006-2017.

* Fits V-Rod 2002-2006.

* Fits Night Rod Special 2007-2011.

* Soaks up small road bumps, yet firm enough to absorb the big ones.

* Helps reduce front end dive during braking,

* Provide excellent ride comfort.

* Rising rate resistance to compression.

* Soft at the start of the travel to offer a in.plushin. ride, firm at theend of the travel to soak up big bumps.

Tech Tips:-

* Will Not Fit V-Rod with Inverted Front-End.

Proudly Made in the USA by Progressive Suspension !

* Includes Seals, O’Rings & Hardware.

* Sold as a Kit.

* Tech Tips:-

* Will Not Fit VRSCR with Upside Down, Inverted Front End.

Proudly Made in the USA by James Gaskets !

* Model-specific ride tune

* Works with existing forks to maintain original look

* Tuned for improved rider comfort and cornering control

* Linear spring rates support the fork with consistent force, reducing brake dive

* Ride Height: Standard

* Spring Weight: Standard – Recommended for up to 240lbs total ride load

* Legend’s comfort touring spring rate provides improved small bump compliance, superior ride quality, as well as increased resistance to bottoming for all day comfort

* Threaded pre-load adjuster allows tuning for various rider weights and increased pre-load range

* Ride quality is smooth and controlled with improved stability, cornering, and traction

* Reduces front-end dive during aggressive braking and maneuvering

* Minimizes dragging floorboards and pegs

* Designed for optimum performance with Legend rear suspensions

* Designed to be used with stock diameter front wheels

* Available only in standard length to maintain factory ride height

* Includes two matched mono-tube, dual chambered damper cartridges, and two top out springs

* Easy installation

* Made by hand in Sturgis, SD USA

Tech Tips:-

These products are NOT designed for use with 21in. and 23in. wheels

Fits:

* Dyna 2006-2017

* Rocker 2008-11

* Breakout 2013up

* Replaces OEM # 46514-06A

Patented fork seal features a balanced dual lip design (oil side) that evenly distributes the pressure reducing operating temperatures, wear and friction. A 3rd lip (air side) acts as an additional dust wiper. Custom Elastomer reduces stiction by 1/3 to ½ less than OEM seals for a smoother fork action and extended life.