* Includes Seals, O’Rings & Hardware.

* Sold as a Kit.

* Tech Tips:-

* Will Not Fit VRSCR with Upside Down, Inverted Front End.

Proudly Made in the USA by James Gaskets !

* Soaks up small road bumps, yet firm enough to absorb the big ones.

* Helps reduce front end dive during braking,

* Provide excellent ride comfort.

* Rising rate resistance to compression.

* Soft at the start of the travel to offer a in.plushin. ride, firm at the end of the travel to soak up big bumps.

Tech Tips:-

* Does NOT fit V-rod with Inverted Front-End

Fitment:

* Dyna ’06up (exc.FLD)

* Softail Rocker ’08-11

* Softail Breakout ’14-17 (not M8)

* V-Rod’02-11 i.e. with NON-Inverted Front End

Proudly Made in the USA by Progressive Suspension !

* Soaks up small road bumps, yet firm enough to absorb the big ones.

* Helps reduce front end dive during braking,

* Provide excellent ride comfort.

* Rising rate resistance to compression.

* Soft at the start of the travel to offer a in.plushin. ride, firm at the end of the travel to soak up big bumps.

Tech Tips:-

* Standard Spring Rate, Recommended for Riders Weighing Under 110kg.

* Does not fit models with OEM InvertedFront End

* Will Not Fit FLHTCUL Ultra Classic Low 2015-2016.

* Will Not Fit FLHTKL Ultra Limited Low 2015-2016.

Proudly Made in the USA by Progressive Suspension !

* Complete kit, includes all parts needed for a complete rebuild of one set of 49mm front fork leg assemblies

* Kit includes: two fork boots, two oil seal caps, two oil seal retaining rings, two fork O-ring caps, four damper tube seal rings, two fork slider washers, two lower fork tube bushings, two fork slider oil seals, two fork slider, upper bushings, two dust seals, two fork tube cap O-rings and two oil seal retaining rings.

* Replaces OEM # 49379-09A

Requires part number LEG-0414-0760 to be used with 21 inch wheels

Requires part number LEG-0414-0761 to be used with 23 inch wheels

Features & Benefits:-

* Performance spring rate delivers agile handling for aggressive riders without sacrificing comfort

* Specifically designed to retain factory ride height on FL touring models

* Improves cornering clearance and minimizes dragging floorboard and footpegs

* Improves ride quality, straight-line stability, high-speed cornering, and maneuverability

* Increases resistance to bottoming out on large bumps or potholes

* Threaded pre-load adjuster allows tuning for various rider weights and increased pre-load range

* Reduces front-end dive and improves front tire traction under aggressive braking

* Designed for optimum performance with all Legend’s rear suspensions

* Includes two stock length mono-tube, dual chambered damper cartridges, and two top outsprings

* Smooth fork boots feature a sculpted design with specially notched inside surfaces to allow the use of 18in. x 5.5in. fat front wheels on factory front ends

* When paired with Arlen Ness fat front fender designs, 18in. x 5.5in. fat front wheels can be installed without any fabrication. True direct bolt-on design

* Designed to work with Arlen Ness and other aftermarket fat front fender designs

* Steel

* Sold in pairs

* Black anodize finish

Tech Tips:-

* Works well with Ness Pro Sport Fat front fender (AN-210-006/007) and Ness Fat Factory Forged Prodigy front wheel (AN-91-650)

* Universal design works with factory and aftermarket front end

* Check clearances when installing with fat front wheel/fender applications

* Add a high-end touch to your M8 Softail Breakout front end with this Kodlin cover

* Made from 6061 aluminum with a bolt black finish

* This kit comes with all necessary hardware for an easy installation

* The black top covers with 6 stainless steel Allen head screws complete that high performance look

Tech Tips:-

* Follow fitment Instructions carefully, take particular note of steps 7 thru 10 –

to avoid loss of the Kodlin top cover the fork tube top nut double sided tape must be pressed & wedged firmly between the Kodlin top cap cover & OEM top fork nut

Your top tree clamp is an essential part of a performance front end setup. The Wolf One Top Clamp has been engineered and designed with a broader cross section offering increased axial strength over the stock Harley Tree. The increased surface area of our wide body fork clamps offer positive hold of your forks giving you peace of mind that your triple tree setup will absorb the abuse of hard use. The Wolf One Top Clamp is intended for Road Glides and allows you to remove your stock plastic Nacelle to have a clean open look of an inverted front end.

* Requires the purchase of # KRA-ST-STT-54

Suggested Additional Purchase

Risers i.e KRA-UN-ISO-50-A

Bars i.e. Part # TS-TSC-2804-1

Proudly made in the USA by Kraus Motor Co.!

Tech Tips:-

Does NOT fit CVO Road Glide Models

Purchase of one of the following internal fork stop kits will be required:

– HHI-HFS-001 BT’36-88

– HHI-HFS-005 FXSB 2013-17, S/Tail 1989-17, FXDWG 1991-05

* Can be used on OEM 41mm Softail 1984-2015 or OEM 41mm Dyna Wide Glide 1993-2005 if upgrading front end to 49mm components

* Fits 49mm Fork Tubes.

Tech Tips:-

When using on FXSB with OEM risers & bars or Custom application with low bars & risers , the small cutout in the Hidden fork stop should be utilised – Check Clearances !

Alteration of steering components ie raked triple trees, extended forks etc. may adversly effect the handling & steering geometry of the motorcycle. Responsibility rests with the customer to select the correct rake & fork length for the particular application. RSS advises consultation with a Professional skilled in rake & trail calculation.

The Wolf One Bottom Clamp is intended to be used with the Wolf One Top Clamp and allows you to remove your stock plastic Nacelle to have a clean, open look of an inverted front end.

* Fits Harley-Davidson Road Glides Only

* Does not have fastener points to run a stock Nacelle or Batwing fairing.

* Mounts directly to your stock 49mm forks.

* Works great with internal fork cartridge kits.

* Machined from high quality American made solid billet Aluminum.

Proudly made in the USA by Kraus Motor Co.!